Products
PRODUCTGPIO OTP
| Part No. | IRC | VDD | ROM | RAM | I/O | TIMER | STACK | PWM | E2 | MODEL | Package | ||||||||||||||||||||||||||||||||||||||
| HS23P1810 | 4MHz±1.0% | 2.0~3.6V | 0.5K*14 | 32 | 6 | 1*8bit/1*11bit | 3 | 1*8bit | - | SLEEP/NORMAL/GREEN | SOP8 | ||||||||||||||||||||||||||||||||||||||
|
More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P1820 | 16MHz | 2.2~5.5V | 1K*14 | 64 | 6 | 1*8bit/1*12bit | 5 | 3*12bit | - | SLEEP/NORMAL/GREEN | SOP8/DIP8 / SOT23-6 | ||||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEWHS23P1820 is 8-bit MCU manufactured by low-power and high-speed CMOS process. It has built-in 1k*14 bit ROM and 64Byte SRAM, including three 12 bit PWM and configurable port comparator module. FEATURES◆ 42 RISC instructions, except that the jump instruction is two cycles, all instructions are single cycle ◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack ◆ Support GOTO instruction full ROM jump, support full ROM subroutine call ◆ 1K×14 program memory ◆ 64 x 8 bit universal register ◆ Direct and indirect addressing ◆ 8 bit real-time clock with 1 programmable predivider (TC0) ◆ 12 bit real-time clock with 1 programmable predivider (TP0) ◆ Configurable port comparator resources ◆ Internal power reset circuit (POR), built-in undervoltage reset (BOR) ◆ Power-on reset timer (PWRT) and oscillator start timer (OST) ◆ Watchdog timer(WDT) with high reliability of internal crystal, enabled or disabled by software ◆ one group of I/O ports can be configured with pull-up, pull-down, and leak-open states ◆ 4 working modes can be switched at will: normal mode, low speed mode, sleep mode and green mode ◆ Wake up sleep: INT/INT1 pin interrupt, IOB input state change, TC0 overflow wake up, COMP wake up ◆ Wake up green: INT/INT1 pin interrupt, IOB input state change, TC0, TP0 overflow wake up, COMP wake up Energy-saving sleep mode, programmable code protection ◆ Optional oscillator options: internal high speed oscillator, internal low speed oscillator, external low speed crystal oscillator ◆ 6 kinds of interrupts available: TC0 overflow interrupt, IOB port change interrupt, INT/INT1 interrupt, TP0 overflow interrupt, interrupts for comp comparisons ◆ Wide operating voltage range: 2.2V to 5.5V More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P1800 | 8MHz | 2.2~5.5V | 1K | 65 | 4/6 | 1*8bit 1*16bit |
5 | 3*8bit | - | SLEEP/NORMAL | SOP8/DIP8 / SOT23-6 |
||||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEWHS23P1800 is 8-bit MCU with low power consumption, high speed, high noise tolerance and OTP program memory. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P1800 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, 3-channel PWM outputs, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P1800 can access 1K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers. FEATURES◆ 42 RISC instructions, all instructions are single cycle, except program branch instructions are two cycles ◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack ◆ GOTO/CALL instruction load 10-bit PC address directly ◆ 1K×14 program memory ◆ 65 x 8 bit general-purpose register ◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle ◆ Direct and indirect addressing ◆ Two 8-bit real-time clocks/counters of 8-bit programmable prescaler (Timer0) ◆ 3 PWM outputs, 1 BUZ Internal power reset circuit (POR), built-in low voltage detection ◆ Power-on reset (POR), low voltage detection (LVD)and brown-out reset(BOR) ◆ Watchdog timer (WDT) with high reliability of internal crystal,enabled or disabled by software ◆ One group of I/O ports IOB adopts independent command control and can be configured with pull-up, pull-down and open-drain states ◆ Wake up sleep: INT pin or port B input state changes to wake up ◆ Power saving sleep mode, programmable code protection ◆ IRC: internal high speed RC oscillator ◆ Wide operating voltage range: 2.2V to 5.5V More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS2300-P | 8MHz | 2.2~5.5V | 1K*14 | 65 | 4/6/12 | 1*8bit | 5 | - | - | SLEEP/NORMAL | SOP8/SOP14 DIP14 SOT23-6 |
||||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEWHS2300-P is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS2300-P includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS2300-P can access 1K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers. FEATURES◆ 42 RISC instructions ◆ All instructions are single cycle except program branch instructions which are two cycles ◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack ◆ Support GOTO instruction full ROM jump Support full ROM subroutine call ◆ 1K×14 program memory ◆ 65 x 8 bit universal register ◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle ◆ Direct and indirect addressing ◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0) ◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) ◆ Power on reset timer (PWRT) and oscillator start timer (OST) ◆ Watchdog timer (WDT) with high reliability of internal crystal,enabled or disabled by software ◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states ◆ Wake up sleep: INT pin or port B input state changes to wake up sleep Energy-saving sleep mode, programmable code protection ◆ Optional oscillator options: ERC: external RC oscillator IRC: internal RC oscillator ERIC: External resistor internal capacitor oscillator LF: low speed crystal oscillator HF: High speed crystal oscillator ◆ Wide operating voltage range: 2.2V to 5.5V More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P10 | 8MHz | 2.2~5.5V | 2K*14 | 65 | 6/12 | 1*8bit | 5 | - | - | SLEEP/NORMAL | SOP8/SOP14 DIP14 |
||||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEWHS23P10 is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P10 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P10 can access 2K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers. FEATURES◆ 42 RISC instructions ◆ All instructions are single cycle except program branch instructions which are two cycles ◆ 14-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack ◆ Support GOTO instruction full ROM jump Support full ROM subroutine call ◆ 2K×14 program memory ◆ 65 x 8 bit universal register ◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle ◆ Direct and indirect addressing ◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0) ◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) ◆ Power on reset timer (PWRT) and oscillator start timer (OST) ◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software ◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states ◆Wake up sleep: INT pin or port B input state changes to wake up sleep ◆Energy-saving sleep mode, programmable code protection ◆ Optional oscillator options: ERC: external RC oscillator IRC: internal RC oscillator ERIC: External resistor internal capacitor oscillator LF: low speed crystal oscillator HF: High speed crystal oscillator ◆Wide operating voltage range: 2.2V to 5.5V More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS2300-PE | 8MHz | 2.2~5.5V | 1K*14 | 65 | 6/12 | 1*8bit | 5 | - | 256*8 | SLEEP/NORMAL | SOP8/SOP14 | ||||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEWHS2300-PE is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS2300-PE includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, Oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS2300-PE can access 1K×13 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers. FEATURES◆ 42 RISC instructions, except the program branch instruction is two cycles, all instructions are single cycle ◆ 13-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack ◆ Support GOTO instruction full ROM jump, support full ROM subroutine call ◆ 1K×13 bit program memory ◆ 65 x 8 bit universal register Mixer block 256 x 8 EEPROM ◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle ◆ Direct and indirect addressing ◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0) ◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) ◆ Power on reset timer (PWRT) and oscillator start timer (OST) ◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software ◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states ◆ Wake up sleep: INT pin or port B input state changes to wake up sleep ◆ Energy-saving sleep mode, programmable code protection ◆ Optional oscillator options: ERC: external RC oscillator IRC: internal RC oscillator ERIC: External resistor internal capacitor oscillator LF: low speed crystal oscillator HF: High speed crystal oscillator ◆ Wide operating voltage range: 2.2V to 5.5V
More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P2002 | 8MHz | 2.2~5.5V | 1K | 65 | 5 | 1*8bit,1*16bit | 5 | 3*8bit | 256*8 | SLEEP/NORMAL | SOP8 | ||||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEWHS23P2002 is 8-bit MCU with low power consumption, high speed, high noise tolerance and OTP program memory. RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P2002 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset, 3-channel PWM outputs, independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P2002 can access 1K×14 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers.. FEATURES◆42 RISC instructions, except the program branch instruction is two cycles, all instructions are single cycle ◆ 13-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack ◆ Support GOTO instruction full ROM jump, support full ROM subroutine call ◆ 2K×13 bit program memory ◆ 64 x 8 bit universal register Mixer block 256 x 8 EEPROM ◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle ◆ Direct and indirect addressing ◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0) ◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) Power on reset timer (PWRT) and oscillator start timer (OST) ◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software ◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states ◆ Wake up sleep: INT pin or port B input state changes to wake up sleep Energy-saving sleep mode, programmable code protection ◆ Optional oscillator options: ERC: external RC oscillator IRC: internal RC oscillator ERIC: External resistor internal capacitor oscillator LF: low speed crystal oscillator HF: High speed crystal oscillator ◆ Wide operating voltage range: 2.2V to 5.5V More |
|||||||||||||||||||||||||||||||||||||||||||||||||
| HS23P2022 | 8MHz | 2.2~5.5V | 2K*13 | 65 | 10 | 1*8bit | 5 | - | 256*8 | SLEEP/NORMAL | SOP14 | ||||||||||||||||||||||||||||||||||||||
PRODUCT OVERVIEWHS23P2022 is MCU with low power consumption, high speed, high noise tolerance and EPROM/ROM based on 8-bit CMOS.RISC has a total of 42 instructions, except that the branch instructions are two-cycle instructions, and the rest are single-cycle instructions. This easy-to-use, easy-to-remember instructions greatly reduce the development time. HS23P2022 includes power-on Reset POR, Brown-out Reset BOR, power-up Reset Timer PWRT, oscillator Start up Timer OST, Watchdog Timer, EPROM/ROM, SRAM, 3-state I/O port (can be set to pull-up/pull-down, open drain), Power-saving sleep mode, 8-bit timer/counter with 8-bit preset,independent interrupt, sleep wake-up mode and reliable code protection, there are two oscillating sources available for user configuration, including a power-saving oscillating source and a low-power oscillator. HS23P2022 can access 2K×13 program storage space, it can directly or indirectly access registers and data storage area, all special function registers distributed in the data storage area contain specific program Pointers.. FEATURES◆ 42 RISC instructions, except the program branch instruction is two cycles, all instructions are single cycle ◆ 13-bit wide instruction, 8-bit wide data path, 5-level deep hardware stack ◆ Support GOTO instruction full ROM jump, support full ROM subroutine call ◆ 2K×13 bit program memory ◆ 64 x 8 bit universal register ◆ 256 x 8 bit EEPROM ◆ Operating speed: DC-20 MHz clock input; Dc-100 NS command cycle ◆ Direct and indirect addressing ◆ 8-bit real-time clock/counter with 8-bit programmable predivider (timer 0) ◆ Internal power reset circuit (POR), built-in low voltage detection (LVD) for undervoltage reset (BOR) ◆ Power on reset timer (PWRT) and oscillator start timer (OST) ◆ Watchdog timer (WDT) with high reliability of internal crystal, enabled or disabled by software ◆ The IOA and IOB of two GROUPS of I/O ports are independently controlled by each other, and can be configured with pull-up, pull-down, and leak-open states ◆ Wake up sleep: INT pin or port B input state changes to wake up sleep ◆ Energy-saving sleep mode, programmable code protection ◆ Optional oscillator options: ERC: external RC oscillator IRC: internal RC oscillator ERIC: External resistor internal capacitor oscillator LF: low speed crystal oscillator HF: High speed crystal oscillator ◆ Wide operating voltage range: 2.2V to 5.5V More |
|||||||||||||||||||||||||||||||||||||||||||||||||
