PRODUCT OVERVIEW  

The HS23P6631 is an MCU with a built-in PIR signal processing circuit. The PIR signal processing circuit includes a 16-bit ADC to convert PIR weak sensing signal; and a 0.4 Hz to 7 Hz digital bandpass filter for the ADC conversion; and a 7-bit SAR ADC according to the actual application. Built-in MCU resource is rich, including interrupt, timer, PWM output, etc.

FEATURES

Direct and indirect addressing is available

216-bit timers:

        TC0: External event counter / PWM0 / Buzzer output;

        TC 1: External event counter / PWM1 / Buzzer output;

Built-in POR, BOR

Built-in electrical reset time PWRT and oscillator start time OSCT

Built-in WDT watchdog

Built-in calibratable IHRC oscillator

Built-in calibratable ILRC oscillator

A safe bit (in code register) protecver is not read out

384 RAM

Built-in I2C communication protocol

Three sets of standard bidirectional I / O ports

Level 8 is used for a nested stack for the subroutines

6 Avinterruptions:

        Four internal interruptions: TC0, TC1, ADC, I2C;

        2 External interrupages: INT0, INT1

16bit Sigma-Delta ADC

PRODUCT OVERVIEW

The HS23P6632 is an MCU with a built-in PIR signal processing circuit. The PIR signal processing circuit includes a 16-bit ADC to convert PIR weak sensing signal; and a 0.4 H z to 7 H z digital bandpass filter for the ADC conversion; and a 7-bit SAR ADC according to the actual application. Built-in MCU resource is rich, including interrupt, timer, PWM output, etc.

FEATURES

¡ô Except for two jump instruction cycles, all other instructions are an instruction cycle

¡ô ROM

¡ô can be addressed both directly and indirectly

¡ô 2-s 16-bit timers:

TC0: External event counter / PWM0 / Buzzer output;

TC1: External event counter / PWM1 / Buzzer output;

The ¡ô has a built-in POR, and BOR

¡ô built-in on-in electrical reset time PWRT and oscillator start time OSCT

¡ô Built-in WDT Watch Dogs

The ¡ô has a built-in calibratable IHRC oscillator

The ¡ô has a built-in calibratable ILRC oscillator

¡ô A security bit (in code register) protecver is not read out

¡ô 384 RAM

¡ô has a built-in I2C communication protocol

¡ô 3 group of standard bidirectional I / O ports

¡ô level 8 is used for a nested stack for subroutines

¡ô 6 available breaks:

Four internal interruptions: TC0, TC1, ADC, I2C;

2 External interrupages: INT0, INT1

¡ô  16bit Sigma-Delta ADC

PRODUCT OVERVIEW

The HS6635CS is an MCU with a built-in PIR signal processing circuit. The PIR signal processing circuit includes a 16-bit ADC to convert PIR weak sensing signal; and a 0.4 H z to 7 H z digital bandpass filter for the ADC conversion; and a 7-bit SAR ADC according to the actual application. Built-in MCU resource is rich, including interrupt, timer, PWM output, etc.

FEATURES

Except for the jump instruction 2 instruction cycles, the other instructions are an instruction cycle

ROM in 2K slices

Direct and indirect addressing is available

216-bit timers:

        TC0: External event counter / PWM0 / Buzzer output;

        TC 1: External event counter / PWM1 / Buzzer output;

Built-in POR, BOR

Built-in electrical reset time PWRT and oscillator start time OSCT

Built-in WDT watchdog

Built-in calibratable IHRC oscillator

Built-in calibratable ILRC oscillator

A safe bit (in code register) protecver is not read out

384 RAM

Built-in I2C communication protocol

Three sets of standard bidirectional I / O ports

Level 8 is used for a nested stack for the subroutines

 6 Avinterruptions:

        Four internal interruptions: TC0, TC1, ADC, I2C;

        2 External interrupages: INT0, INT1

16bit Sigma-Delta ADC